Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cosmetic threads disapearing

Status
Not open for further replies.

MagnetsDA

Mechanical
Joined
Dec 21, 2004
Messages
9
Location
US
I have a drawing that is loosing the cosmetic threads on some holes. I used the hole wizard to make the holes. Later I added another point in the sketch (to add another hole). Originally the cosmetic threads showed on the drawings. Now I go back into the drawing and one of the three holes does not show a cosmetic thread. I can highlight the cosmetic thread in the feature manager tree and it shows, but will not stay. If I right click on it, it gives the option to hide (not show). How can I get the threads to show and stay showing?

 
The display annotations in the FM is on. I just got some other advice to insert model items-cosmetic threads. I tried this and it worked. No reason given as to why they disapeared in the first place.

I think I am all set for now. Thanks Scott.
 
Could you please post what you did to fix the problem? We are having the same issues of cosmetic threads disappearing...

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top