Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Corrosion / pitting on in-service Pressure Vessel 1

Status
Not open for further replies.

shaiful

Petroleum
Joined
Feb 15, 2014
Messages
5
Dear Members,

I had found a few corrosion/ pitting when I do vessel inspection. some time the damage still can ignore refer to code and standard, but still need to do prevention. What type of repair that I can recommendation in my report?

Thanks,

Regards
SHAIFUL
 
Lap welded patch plates, butt welded patch plates, and weld overlays are all common repairs for local pitting of steel plates. Pitting over larger areas may require more extensive repairs.
 
Refer to ASME PCC2.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top