Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
corrosion in pumps
- Thread starter kilavuz
- Start date
- Thread starter
- #3
Thank you for your reply.
I am interested in analysing of corrosion types that occur mostly in centrifugal pumps. The chemical attack of pump casing or impeller by H2SO4 solution @ relatively high T can be an example.
I would like to study on corrosion kinetics, prevention from corrosion in pumping bussiness & pump material selection against to corrosion.
I am interested in analysing of corrosion types that occur mostly in centrifugal pumps. The chemical attack of pump casing or impeller by H2SO4 solution @ relatively high T can be an example.
I would like to study on corrosion kinetics, prevention from corrosion in pumping bussiness & pump material selection against to corrosion.
International Nickel Development Institute have published a booklet on selection of stainless steel castings for pump castings,where they have selected different environments ,temperatures etc and suggested suitable material. You can contact them for any technical assistance which they readily provide.
Dr Arun Rao [sig][/sig]
Dr Arun Rao [sig][/sig]
- Status
