Would you guys show me the way to copy 2d generative drafting to a sketch in Part Design ? I've tried the way in this video but nothing happened after paste command .
> Save the Drawing as a DXF
> Open the DXF File
> Copy the Geoemtry from the DXF
> Switch to a CATPart in Part Design workbench
> Create a Sketch
> With the Sketcher Workbench open, Paste the Geometry into the sketch
itsmyjob right. check if you are copying the view..any way the macro can do the job.. i don't have it at home but i'm gonna upload the macro at Sunday when i get back to work.