Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Copper to Copper bonding

Status
Not open for further replies.

Vade

Bioengineer
Mar 11, 2002
1
I am looking for an adhesive or bonding compound for bonding copper plates together. The adhesive must withstand temperatures in the 250 degree range. Thanks
Vade
 
Replies continue below

Recommended for you

Is silver soldering acceptable? Also, you didn't say if it is 250 °F or 250 °C.
 
Well if it wasn't for the fact that the material is copper, I would suggest RTV. Unfortunately RTV (up to 500 - 600F) is from the silicone family. It will free acetic acid as it cures and corrode the copper. If it is 250C you cannot use an organic compound and are limited to the inorganics. I'm going to side with the first two gentlemen. John Schrock
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor