Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cooling tower fan stack height modification
- Thread starter leornhoj
- Start date
racookpe1978
Nuclear
How much money do you have? How much time do you have?
(Many things are possible, given enough time and money.)
With no more details than what you have proved? No, we cannot tell you more.
(Many things are possible, given enough time and money.)
With no more details than what you have proved? No, we cannot tell you more.
- Thread starter
- #3
Cooling Tower Details:
Type : Mechanical Induced Draught Counterflow
# of Cells : 3
Flow : 2271.33 cu. m./h per cell
Hot Water Temp : 52 deg C
Cold Water Temp : 33 deg C
Wet bulb Temp : 27 deg C
# of Fan/cell : 1
motor power : 120kw/cell
Fan speed : 160rpm
Fan stack mat'l : FRP
Fan stack height : 7ft.
Fan diameter : 24ft.
drift eliminator : PVC
Type : Mechanical Induced Draught Counterflow
# of Cells : 3
Flow : 2271.33 cu. m./h per cell
Hot Water Temp : 52 deg C
Cold Water Temp : 33 deg C
Wet bulb Temp : 27 deg C
# of Fan/cell : 1
motor power : 120kw/cell
Fan speed : 160rpm
Fan stack mat'l : FRP
Fan stack height : 7ft.
Fan diameter : 24ft.
drift eliminator : PVC
- Status
Similar threads
- Locked
- Question
- Locked
- Question