Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connectors Dimensions

Status
Not open for further replies.
fxue

fxue

Bioengineer
Mar 26, 2009
21
Hi,
I am trying to use connectors to link the end nodes of two beams in Abaqus. Is there any way to assign the dimensions of the connectors, eg, diameters? Thanks.

Feng
 
Status
Not open for further replies.

Similar threads

R
  • Question
axial connectors in series
Replies
5
Views
4K
rph5g
R
ulloap
  • Locked
  • Question
Axial + Hinge Connectors / Displacement Issues
Replies
8
Views
501
ulloap
ulloap
g.alshamsi
  • Locked
  • Question
Issues with modeling connectors with STOP command
Replies
2
Views
305
g.alshamsi
g.alshamsi
jball1
  • Locked
  • Question
Modeling strut with connectors
Replies
2
Views
199
jball1
jball1
n090909
  • Locked
  • Question
ABAQUS Connectors with Field Variables (UFIELD)
Replies
2
Views
289
n090909
n090909

Part and Inventory Search

Sponsor

Back
Top Bottom