Configuration of Color

[Uka]

My company uses a housing that is used on multiple models. We change the color of coating depending on the model type. I would like to have "color-configuration" within a part. Would it be possible? If not, does anybody have good idea?

Thanks-

Uka

 

[CorBlimeyLimey]

You can handle this with a regular Design Table

The design table can include a column for configuration-specific colors. The value is a 32-bit integer that specifies RGB (red, green, blue). If no value is specified, zero (black) is used.

If you know the 32-bit integer value of a color, you can type the number directly into the design table in a column with the $COLOR parameter as the header. If you do not know the 32-bit integer value, you can calculate it in the design table with the RGB component values.

from (the City of) Barrie, Ontario.

If you choke a smurf, what color does it turn?

 

[meintsi]

Or simply create the new configuration, right-click the part in the design tree and select properties, hit the color button, change the color, and before saving, make sure this configuration only is selected.



Remember...
"If you don't use your head,
your going to have to use your feet."