Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuration of a micro-hardness tester( Operation of the machine)

Status
Not open for further replies.
209100029

209100029

Materials
Joined
Nov 23, 2011
Messages
2
Location
ZA
Hi guys,

I have been trying to measure the hardness of materials using the Japanese Micro-hardness tester MHT-1,and I have found that the machine is giving out false answers and also its calibration is not the same 700HV.

Any help to this problem is welcomed..
 
Sort by date Sort by votes
It would appear that the instrument is out of calibration. Contact the manufacturer and determine whether they will need to recalibrate it.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Zeyneb
  • Locked
  • Question Question
Hardness Tester File Set
Replies
2
Views
531
IRstuff
IRstuff
PRjuventus
  • Locked
  • Question Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus
wontweldcantweld
  • Locked
  • Question Question
EN 10025-6: S690QL hardness
Replies
2
Views
3K
kingnero
kingnero
jessieleo99
  • Locked
  • Question Question
Micro cracks appear in ALSi10Mg alloy castings
Replies
2
Views
2K
swall
swall
A
  • Question Question
Measurement of gamma prime in superalloys.
Replies
2
Views
8K
absaul02
A

Part and Inventory Search

Sponsor

Back
Top