Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

configuration file

  • Thread starter Thread starter satish
  • Start date Start date
Status
Not open for further replies.
S

satish

Guest
what is the main function of configuration file and dtl file. How it works. can you explain me briefley
 
from the user side the main purpose of the config file is to store the mapkeys, from the admin side it s store the config of pro/e.

all *.dtl are config options for drawings you can store either iso standard or ansi. It helps also in displaying the drawing.
 
Status
Not open for further replies.

Similar threads

Milan Martikan
  • Locked
  • Question Question
NWF file generator for facilitating routing in PTC Creo Cabling
Replies
0
Views
1K
Milan Martikan
Milan Martikan
dkakth
  • Locked
  • Question Question
CREO 9 default configuration
Replies
7
Views
2K
looslib
looslib
jombfish
  • Locked
  • Question Question
Creo: Reducing File Size for Mastercam
Replies
1
Views
429
looslib
looslib
P
Creating a .sym file from a DXF
Replies
1
Views
5K
charleskim
C
ProEpro
  • Locked
  • Question Question
File export from Comonspace
Replies
2
Views
313
ProEpro
ProEpro

Part and Inventory Search

Sponsor

Back
Top