Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete test record software

Status
Not open for further replies.

Rjeffery

Civil/Environmental
Joined
Sep 15, 2002
Messages
332
Location
US
Does anyone have recommendations for software to keep records of break data in the lab environment?
 
Look at Humboldt Mfg. Call and talk to Mahir Nadaf
551-D Pylon Drive
Raleigh, NC 27606 X221
Bus: +1 (800) 537-4183
E-mail: mahir@ehumboldt.com

Tell him that I referred you to him and he will connect you with the right softwear and a demo copy. Tell him you are evaluating softwear. The cost is about $750, now there is other but This is the most cost effective.

Bob Smith
 
I have a Rebound Hammer (Swiss Hammer) and It's not calibrated. In the verification in Anvil, it should read 84, and it read 80.23 (average).

How do I do the correction to accurate reading?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top