Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete Technology DOE method

Status
Not open for further replies.
sro2ck

sro2ck

Civil/Environmental
Joined
Jan 18, 2014
Messages
12
In DOE method,
if slump has been specified as 30mm. so, should i take (10-30)mm interval datas
Or
(30-60)mm interval datas for my calculations.
 
Sort by date Sort by votes
Also,for determining Maximum and minimum water content, specification table is given only for aggregates of 20mm Nominal Maximum
size.Can any one suggest where can i get specification table for aggregates of 40mm Nominal Maximum size.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

C
  • Locked
  • Question Question
Concrete in Bored pile head
Replies
4
Views
4K
BridgeSmith
BridgeSmith
G
  • Locked
  • Question Question
Abaqus General Contact for Concrete Simulatilns
Replies
1
Views
2K
SWComposites
SWComposites
Lanza
  • Question Question
Load capacity for a machine on a concrete slab.
Replies
2
Views
800
JAE
JAE
D
  • Locked
  • Question Question
rebar in the mortar between concrete blocks
Replies
3
Views
3K
JAE
JAE
RFreund
  • Locked
  • Question Question
Temporary Reinforced Concrete Pipe Support
Replies
1
Views
1K
jhnblgr
jhnblgr

Part and Inventory Search

Sponsor

Back
Top