Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete slump requirements (lower and upper limits) per ACI!

Status
Not open for further replies.
engr567

engr567

Structural
Aug 21, 2009
96
Is there a section or table in ACI that shows the slump limits? I would appreciate it.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
See ACI 211 Table 6.3.1 "Recommended Slumps for Various Types of Construction" and ACI 117 Section 2.5.1.

Greg
 
Upvote 0 Downvote
Once a recommended slump has been selected and specified, the limits of the delivered slump range are then defined in ASTM C94, paragraph 6.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cliff234
  • Question
ACI 318-19 "additional" (?) ductility requirements for ASTM A615 and A706 Rebar
Replies
7
Views
2K
cliff234
cliff234
dblnkl
  • Locked
  • Question
Micropile Design per ACI 318-25
Replies
2
Views
2K
dblnkl
dblnkl
MegaStructures
  • Question
Upper Floor Garage Gym 1
Replies
19
Views
3K
jerseyshore
jerseyshore
Nick6781
  • Locked
  • Question
ACI Requirements for Bottom Bar Splice Location
Replies
3
Views
600
OldDawgNewTricks
OldDawgNewTricks
lexeng18
  • Question
Moment Frame Partial Fixity with a hard upper limit
Replies
5
Views
2K
bones206
bones206

Part and Inventory Search

Sponsor

Back
Top Bottom