Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete slump requirements (lower and upper limits) per ACI!

Status
Not open for further replies.
engr567

engr567

Structural
Joined
Aug 21, 2009
Messages
96
Is there a section or table in ACI that shows the slump limits? I would appreciate it.
 
Sort by date Sort by votes
See ACI 211 Table 6.3.1 "Recommended Slumps for Various Types of Construction" and ACI 117 Section 2.5.1.

Greg
 
Upvote 0 Downvote
Once a recommended slump has been selected and specified, the limits of the delivered slump range are then defined in ASTM C94, paragraph 6.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SteelPE
  • Question Question
ACI Shear Strength Requirements
Replies
7
Views
14K
haynewp
haynewp
cliff234
  • Question Question
ACI 318-19 "additional" (?) ductility requirements for ASTM A615 and A706 Rebar
Replies
7
Views
3K
cliff234
cliff234
dblnkl
  • Locked
  • Question Question
Micropile Design per ACI 318-25
Replies
2
Views
3K
dblnkl
dblnkl
MegaStructures
  • Locked
  • Question Question
Upper Floor Garage Gym
Replies
19
Views
4K
jerseyshore
jerseyshore
Nick6781
  • Locked
  • Question Question
ACI Requirements for Bottom Bar Splice Location
Replies
3
Views
878
OldDawgNewTricks
OldDawgNewTricks

Part and Inventory Search

Sponsor

Back
Top