Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete basin, how to determine joint placement ?

Status
Not open for further replies.
gasma1975

gasma1975

Structural
Joined
Sep 19, 2006
Messages
53
Location
CA
Hi,

See the PDF attached. I have a concrete basin with a particular shape. I want to avoid any concrete cracks etc. How do you determine where to place the joints and how many concrete pour section will be required ?

Anyone knows a guide for such construction ?

thank you,

gasma1975
 
Status
Not open for further replies.

Similar threads

NFExp
  • Question Question
Concrete Column - cold joint cracking
Replies
6
Views
9K
TRAK.Structural
TRAK.Structural
Struct123ure
  • Question Question
Rotational Stiffness of a Joint How to Check
Replies
9
Views
8K
Struct123ure
Struct123ure
EngDM
  • Locked
  • Question Question
How to determine if proprietary members are code compliant
Replies
6
Views
3K
skeletron
skeletron
M
  • Locked
  • Question Question
How to determine the height of boundary strut?
Replies
0
Views
1K
Mon_eng
M
MAEngr
  • Question Question
How to attach concrete buttress wall to toe side face of CMU retaining wall?
Replies
7
Views
7K
MAEngr
MAEngr

Part and Inventory Search

Sponsor

Back
Top