Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Computation of stress and averaging by ABAQUS

Status
Not open for further replies.
shahir

shahir

Mechanical
Joined
May 9, 2006
Messages
27
Location
AT
Hi friends

Could anybody tell me how ABAQUS will computes the stress values and averaging.is there any explanation available in the Documentation? if so plz give me the link.i couldnt able to find anything

thanks in advance

sheriff
 
Sort by date Sort by votes
If you referred to the averaging of values computed at the integration points for plotting purposes I hope this will help:

ABAQUS/CAE User's Manual->30.1 Understanding contour plotting

Regards.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
737
FEA way
FEA way
A
  • Locked
Convergence Issue while performing abaqus explicit followed by standard
Replies
2
Views
3K
FEA way
FEA way
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
S
  • Locked
  • Question Question
Abaqus radial expansion and rotation
Replies
6
Views
5K
S2196L
S
vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
16K
snow83
S

Part and Inventory Search

Sponsor

Back
Top