McDermott1711
Mechanical
A (natural gas) compressor vendor asked us to design suction and discharge piping system so that its natural frequencies go above 6 Hz. Can anybody tell me from where this 6 Hz is coming?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Compressor Piping Natural Frequencies 5
- Thread starter McDermott1711
- Start date
- Status
BigInch,
My company is facing high vibration problem and i'm not piping engineer even, our compressor piping is designed for 8 Hz frequnecy but eqully supported at 20', is eqully support is creating problem for vibration in our case.
Thanks
10815L
My company is facing high vibration problem and i'm not piping engineer even, our compressor piping is designed for 8 Hz frequnecy but eqully supported at 20', is eqully support is creating problem for vibration in our case.
Thanks
10815L
I'd be likely to believe, if it is a reciprocating compressor. I'd have to know much more about the system to form some opinion as to what might be causing the problem. Please start a new thread, post the relevant design information and a diagram and we'll have a look. But please start a new thread.
I hate Windowz 8!!!!
I hate Windowz 8!!!!
- Status
Similar threads
- Locked
- Question
- Question
