Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compact Tensile Specimen

Status
Not open for further replies.
op8

op8

Mechanical
Joined
Jul 5, 2012
Messages
1
Location
FR
Hello,

I have modeled the compact tension specimen and I have implemented the VCCT criterion. In the History output, I have the displacement applied on the center of the upper pin. In the curve Load-displacement, I don't know if this is the displacement applied to upper pin ou to the two pins.
Thanks
 
Status
Not open for further replies.

Similar threads

compe_ad
  • Locked
  • Question Question
Tensile damage in concrete
Replies
6
Views
452
driftLimiter
driftLimiter
njm789
  • Locked
  • Question Question
Ultimate Failure of Specimen
Replies
3
Views
233
FEA way
FEA way
msuhairil
  • Locked
  • Question Question
apply concentration load on specimen
Replies
7
Views
230
PeteDB
PeteDB
msuhairil
  • Locked
  • Question Question
how to extract stress-strain data for non linear tensile simulation from ABAQUS
Replies
8
Views
338
rb1957
rb1957
bedyhope
  • Locked
  • Question Question
Simulation of Tensile test coupon for large plastic deformation and stress triaxility correction
Replies
2
Views
142
bedyhope
bedyhope

Part and Inventory Search

Sponsor

Back
Top