Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cold metal forming problem 1

Status
Not open for further replies.
perzo84

perzo84

Mechanical
Joined
Mar 13, 2008
Messages
22
Location
GB
Hi

I describe my problem below in the DOC file.

Thanks for any help
Konrad
 
Sort by date Sort by votes
Instead of trying to move the frizbee thing as well as applying a force why not move the cylinder/mandrel instead?

corus
 
Upvote 0 Downvote
This is one of the options. I'm now trying using only move, and watch on the material reaction force. But put force gona by easier to describe input parameters in spinning or flow forming proces. Thanks corus

Konrad
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
G
  • Locked
  • Question Question
Abaqus explicit - general contact problem
Replies
5
Views
17K
FEA way
FEA way
nilesh_dot
  • Locked
  • Question Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
1K
nilesh_dot
nilesh_dot
vitoram14
  • Locked
  • Question Question
Linking Problem ABAQUS FORTRAN
Replies
1
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top