Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cohesive zone modelling trapezoidal output problem

Status
Not open for further replies.
abc123ali

abc123ali

Mechanical
Joined
Nov 6, 2023
Messages
90
Location
HK
Respected ABAQUS users, The output results of the 2d model of cohesive zone modelling of the double cantilever beam in abaqus documentation is bilinear. Is there an example of trilinear of trapezoidal output result? What parameter should be added to get trapezoidal output?
Thanks for cooperation
 
Sort by date Sort by votes
What output - force vs displacement plot ? Do you want to use a trapezoidal cohesive (traction-separation) law ? There is a YouTube video about that: "Trapezoidal cohesive law || Abaqus || Get Matlab code".
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

abc123ali
  • Locked
  • Question Question
Cohesive zone modelling experimental input for simulation compatibility
Replies
2
Views
734
abc123ali
abc123ali
R
  • Question Question
Zig-Zag Strain Pattern in NSM FRP Pull-Out Simulation (Cohesive Zone Model) – Need Help
Replies
2
Views
9K
Roshaan
R
M
  • Question Question
Cohesive element distorted
Replies
1
Views
3K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Cohesive zone modeling results and convergence problem
Replies
1
Views
585
FEA way
FEA way
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top