Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cohesive zone modelling trapezoidal output problem

Status
Not open for further replies.

abc123ali

Mechanical
Joined
Nov 6, 2023
Messages
90
Location
HK
Respected ABAQUS users, The output results of the 2d model of cohesive zone modelling of the double cantilever beam in abaqus documentation is bilinear. Is there an example of trilinear of trapezoidal output result? What parameter should be added to get trapezoidal output?
Thanks for cooperation
 
What output - force vs displacement plot ? Do you want to use a trapezoidal cohesive (traction-separation) law ? There is a YouTube video about that: "Trapezoidal cohesive law || Abaqus || Get Matlab code".
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top