COG for mechanism part

[ghunk]

Guys..please help me..

i have hand robot design consist of 3 part..each part connected by pin...i want to know COG of the part refer to Assy coord system..how to do it??


i want to know the COG before n after move...

please help me...urgent

thanks

 

[jabbadeus]

Analysis > Model > Mass Properties

 

[esundman]

Ghunk,

If you have the Behavioral Extension Module (BMX) you can place a point on the COG, and when the model moves or updates, the point updates as well. This is handy, since you can now dimension to the point on drawings.

This post explains it further:
http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=31 083