Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Code Material Substitution

Status
Not open for further replies.
rjw57

rjw57

Mechanical
Joined
Jan 27, 2002
Messages
109
Location
US
(PLEASE NOTE: This is a crosspost with B&PV forum)

I am wondering if there is any verbage in the B&PV code regarding the use of a material not specifically listed in Section II Part D and if so, where is this information located? Bottom line, I would like to use a seamless tubing supplied by my vendor as TP316L per A269 but the code does not permit the use of A269. The material spec required for TP316L seamless tubing per the 1998 code (as I see it) is an SA213. The question is this - can I find a way to legally substitute the A269 for the SA213?

Thanks!
 
Status
Not open for further replies.

Similar threads

mechengineer
  • Question Question
Studding Flange Design as per Code
Replies
1
Views
3K
r6155
r6155
abangbikerz
  • Question Question
lowest permissible temp for any material
Replies
3
Views
6K
abangbikerz
abangbikerz
WE.MetE
  • Locked
ASME - acceptable material editions
Replies
0
Views
1K
WE.MetE
WE.MetE
MicroEng
  • Locked
  • Question Question
RTJ Gasket manufacturing row material!
Replies
0
Views
1K
MicroEng
MicroEng
1965mt
  • Locked
  • Question Question
Pressure Washer code requirements
Replies
0
Views
343
1965mt
1965mt

Part and Inventory Search

Sponsor

Back
Top