Help me!!; I´m lapping mating faces with a lappin flurry (aluminium) on a table of casting iron. Pieces finishes dirty. I process lots of about 200 pcs. I need all them to be cleaned. Nowadays we put them on an alternative washer fulled of maintenance-cleaning liquid which helps removing dirty, but no at all. Does anyone knows an alternative?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CLeaning mating face of a mechanical seal
- Thread starter gedeos
- Start date
What kind of part are they? What are they made of? What size are they?
I've lapped cast iron hydraulic pump and motor endcaps which were up to 12" across and weighed 40-50 lbs. We were a job shop which made the parts and shipped to the hydraulic manufacturer. Nothing was hazardous and we simply washed with water. Ultrasonic cleaning would be effective on a small parts.
I've lapped cast iron hydraulic pump and motor endcaps which were up to 12" across and weighed 40-50 lbs. We were a job shop which made the parts and shipped to the hydraulic manufacturer. Nothing was hazardous and we simply washed with water. Ultrasonic cleaning would be effective on a small parts.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
