Feb 10, 2025 #1 B Brooke William Industrial Nov 7, 2024 6 I want to manufacture turbine blades with Waspaloy. What are the yield strength and tensile strength at 650°C, and do you have any recommendations?
I want to manufacture turbine blades with Waspaloy. What are the yield strength and tensile strength at 650°C, and do you have any recommendations?
Feb 10, 2025 #2 Gr8blu Electrical Aug 18, 2021 756 I take it you've already researched the "basic" properties of the material. https://www.specialmetals.com/documents/technical-bulletins/waspoloy.pdf Maybe graph the known data and see where the curve falls at the desired temperature condition? Upvote 0 Downvote
I take it you've already researched the "basic" properties of the material. https://www.specialmetals.com/documents/technical-bulletins/waspoloy.pdf Maybe graph the known data and see where the curve falls at the desired temperature condition?
Feb 10, 2025 #3 EdStainless Materials May 20, 2004 16,341 There is likely data for this alloy in MMPDS also. It has been around since the 50's so there is lots of data out there. Upvote 0 Downvote
There is likely data for this alloy in MMPDS also. It has been around since the 50's so there is lots of data out there.
