Brooke William
Industrial
- Nov 7, 2024
- 6
I want to manufacture turbine blades with Waspaloy. What are the yield strength and tensile strength at 650°C, and do you have any recommendations?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
A question about Waspaloy material
- Thread starter Brooke William
- Start date
I take it you've already researched the "basic" properties of the material.
Maybe graph the known data and see where the curve falls at the desired temperature condition?
Maybe graph the known data and see where the curve falls at the desired temperature condition?
EdStainless
Materials
There is likely data for this alloy in MMPDS also.
It has been around since the 50's so there is lots of data out there.
It has been around since the 50's so there is lots of data out there.
- Status
Similar threads
- Question
- Question