Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Classification of nuclear piping
- Thread starter samedi
- Start date
A long, long time ago.... there used to be a happy group of engineers that designed nuclear plants for utilities....
No more...
Check ASME NB/NC/ND 3600 for a general definition of the three pipe classes. each plant required what was called a PFSAR and an FSAR ( preliminary and final safety analysis report) These were the documents that contained what is commonly called the Design Criteria for the plant.
Within the PFSAR or FSAR was the definition of the classification of safety systems and thier ASME "Class"
Also try
Good Luck !!!!
MJC
No more...
Check ASME NB/NC/ND 3600 for a general definition of the three pipe classes. each plant required what was called a PFSAR and an FSAR ( preliminary and final safety analysis report) These were the documents that contained what is commonly called the Design Criteria for the plant.
Within the PFSAR or FSAR was the definition of the classification of safety systems and thier ASME "Class"
Also try
Good Luck !!!!
MJC
- Status
Similar threads
- Question
