Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change Cross Hatching (XHATCH)

Status
Not open for further replies.
wtxhorsman

wtxhorsman

Mechanical
Joined
Mar 10, 2016
Messages
38
Location
US
Hello Creo community,

I am attempting to change the cross hatching of components in an assembly drawing in Creo 2.0. When I select the cross hatching menu and try to change the cross hatching it changes all components. Can anyone help with a work around to this issue? Do I need to go back into the original components and create cross sections and update hatching there?

Thanks in advanced for any insights.
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
with lookup_inst function variants change family table via parameters
Replies
1
Views
2K
3DDave
3DDave
M
Custom Cross sections in Creo View
Replies
0
Views
2K
msiva1981
M
S
special change request-fixing associations
Replies
0
Views
3K
sadrok-01
S
Fernandoomi
  • Locked
  • Question Question
How to change Pipe segment Diameter? (CREO 4.0)
Replies
1
Views
387
3DDave
3DDave
R
Incorrect hatching
Replies
0
Views
3K
Robaczek
R

Part and Inventory Search

Sponsor

Back
Top