Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CG on 2:1 SE Head

Status
Not open for further replies.
Sam35

Sam35

Mechanical
Joined
Sep 14, 2003
Messages
19
Location
CA
Has anybody got a quick formula to find the location of Center of gravity on a 2:1 SE Head.
Thx,
Sam
 
Sort by date Sort by votes
Sam35-

Try (but verify that it makes sense!) m=0.144D (empty) and m=0.188D (full) where m is the distance from tangent line to cg and D is the diameter.

jt
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

HungM
  • Locked
  • Question Question
2:1 Head straight flange in SEC. VIII, DIV. 1
Replies
19
Views
2K
gnc89
gnc89
pat7987
  • Question Question
ASME Section VIII Div.1 formed head straight flange (skirt) design for external loads
Replies
4
Views
7K
KevinNZ
KevinNZ
LS_SMS
  • Locked
  • Question Question
ASME Sec. VIII, Div. 1 - Ellipsoidal Head
Replies
9
Views
5K
TGS4
TGS4
Vessel-SA
  • Question Question
nozzle-head PWHT
Replies
14
Views
15K
Trestala
Trestala
LY.Yan
  • Question Question
Appendix 2 Figure 2-4(11) integral
Replies
8
Views
9K
LY.Yan
LY.Yan

Part and Inventory Search

Sponsor

Back
Top