Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ceramic back-up bars
- Thread starter daski
- Start date
Ceramic backing is an acceptable method. Some welders experience more difficulty in achieving a CP weld without root discontinuities in using the ceramic backing.
Assuming you will have nondestructive testing (either radiographic or ultrasonic) done on the welds, this should not be an issue. Please note that the welder should be qualified to this procedure in accordance with the required standard, such as AWS D1.1
Assuming you will have nondestructive testing (either radiographic or ultrasonic) done on the welds, this should not be an issue. Please note that the welder should be qualified to this procedure in accordance with the required standard, such as AWS D1.1
Guest
Gullco Intl. Ltd
Is a Manufacturer of ceranic weld backing
To Much info to post .
I can help with this.
rdrake@gullco.com
Is a Manufacturer of ceranic weld backing
To Much info to post .
I can help with this.
rdrake@gullco.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question