Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
centrifugal compressor
- Thread starter naeim
- Start date
naeim,
previous thread link is no good
use this link
follow first thread to Plant Eng article
previous thread link is no good
use this link
follow first thread to Plant Eng article
Naeim,
Density of the gas can change (because of change in temperature and/or composition)
Speed (if you have a constant speed motor this may not be the case)
Fouling of the internals
Internal leakages due to worn out labyrinths
More leakage across the balance line, if you have one.
Change in discharge pressure
Etc…
Regards,
Guru
Density of the gas can change (because of change in temperature and/or composition)
Speed (if you have a constant speed motor this may not be the case)
Fouling of the internals
Internal leakages due to worn out labyrinths
More leakage across the balance line, if you have one.
Change in discharge pressure
Etc…
Regards,
Guru
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
