Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Centrifugal compressor simulation question.

Status
Not open for further replies.
JoeySoap

JoeySoap

Specifier/Regulator
Joined
Jul 30, 2008
Messages
44
Location
GB
Hi all, I have recently been reading a dynamic simulation report on a centifugal compressor set that refers to a couple of terms that I'm not familiar with-

a) "Settle out pressure". b) "S curve".

Could someone please explain to me what these terms mean? Thank you.
 
Status
Not open for further replies.

Similar threads

Daparojo252
  • Question Question
Deflection Of A Mass Due To Centrifugal Force
Replies
11
Views
5K
Daparojo252
Daparojo252
S Jana
  • Question Question
Water contamination in oil of screw compressor for LPG BOG system.
Replies
2
Views
5K
LittleInch
LittleInch
N
  • Locked
  • Question Question
Assistance with FEM Simulation of Continuous Rotary Extrusion in Abaqus
Replies
1
Views
2K
SWComposites
SWComposites
ESTinker
  • Locked
  • Question Question
GD&T question on position
Replies
5
Views
3K
mfgenggear
mfgenggear
Ahmed Khan
  • Locked
  • Question Question
The control of centrifugal Comp.
Replies
3
Views
339
FacEngrPE
FacEngrPE

Part and Inventory Search

Sponsor

Back
Top