Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CEN steel standard prefixes 1
- Thread starter wood3474
- Start date
-
1
- #2
description of CEN steel standard suffixes --> see EN10027-1
Suffix :
M : Thermomechanical normalisation
L : Low temp
N : Normalized
J : Impact test 27J R/0/2/3/4/5/6 = 20°C/0/-20/-30/-40/-50/-60
K : Impact test 40J : idem for R/0/2/3/4/5/6
L : Impact test 60J : idem for R/0/2/3/4/5/6
G1 : Normalized or "normalized and rolled"
G2 : at manufacturer convinience
W : Atmospheric corrosion resistance
Hope it helps
Prefix :
S is for Structure
P for Pressure equipment
Suffix :
M : Thermomechanical normalisation
L : Low temp
N : Normalized
J : Impact test 27J R/0/2/3/4/5/6 = 20°C/0/-20/-30/-40/-50/-60
K : Impact test 40J : idem for R/0/2/3/4/5/6
L : Impact test 60J : idem for R/0/2/3/4/5/6
G1 : Normalized or "normalized and rolled"
G2 : at manufacturer convinience
W : Atmospheric corrosion resistance
Hope it helps
Prefix :
S is for Structure
P for Pressure equipment
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
