Can anyone recommend an EN standard that gives information on suitable working heights for standing operators at a machine (without the aid of an adjustable step). So for example, the ideal height for access to a machine that requores a hopper to be refilled every 2 hours, or suitable base plate heights, or HMI heights, push button heights etc, general interaction with a machine basically.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ergonomic Height Standards 2
- Thread starter Finglas
- Start date
am not sure if EN covers such cases. A generic book like Neufert's one would help.
Structural Analysis of 2D Structures software
Static, Dynamic,Linear and Non-Linear Analysis
of frames, trusses, beams etc.
Structural Analysis of 2D Structures software
Static, Dynamic,Linear and Non-Linear Analysis
of frames, trusses, beams etc.
-
2
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question