Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CD5MCU Valve

Status
Not open for further replies.
thew

thew

Mechanical
Joined
Oct 17, 2017
Messages
1
Location
AU
Our client has requested a valve in CD5MCU material for a pipeline from SAF2507 (S32750). From my searches I can't find any material relating to this material. Does this material even exist?
 
Sort by date Sort by votes
Did they mean CD4MCu? We have several pumps made out of that.

Good luck,
Latexman

To a ChE, the glass is always full - 1/2 air and 1/2 water.
 
Upvote 0 Downvote
Ask the persistent engineer for a lists of suppliers of CD5MCu, might delete the feeling of importance.

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Upvote 0 Downvote
They,
CD4MCu is a AsTM A351 cast Duplex Steel material. Hold a copy of ASTM A351 and look for grade CD4MCu.

Ganga D. Deka, P. Eng
Canada
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Question Question
Jacking Oil Pump Air Lock Bleed Valve
Replies
5
Views
7K
LittleInch
LittleInch
AlbertaMecchie
  • Locked
  • Question Question
Relief Valve set pressures vs. valve body rating
Replies
5
Views
4K
GD2
GD2
swazimatt
  • Question Question
Air valve on falling main
2
Replies
21
Views
7K
swazimatt
swazimatt
C
  • Locked
  • Question Question
high pressure shutoff valve?
Replies
11
Views
6K
LittleInch
LittleInch
pumpmann
  • Locked
  • Question Question
pump control valve for high acidity
Replies
3
Views
3K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top