Jan 10, 2005 #1 par1 Automotive Joined Oct 11, 2004 Messages 134 Location US I have some UG dwg files which are translated from catia V4. I wanted to modify dimension & tolerance in dwgs but it didn't allow me to do so. Also tell me if any other possible way, early response would be a great help. Thank you,
I have some UG dwg files which are translated from catia V4. I wanted to modify dimension & tolerance in dwgs but it didn't allow me to do so. Also tell me if any other possible way, early response would be a great help. Thank you,
Jan 10, 2005 #2 Xwheelguy Automotive Joined Mar 17, 2004 Messages 2,048 Location US It's possible that the translation caused the dimension to become a non-living dimension. Do an Information -> Object to find out if it's still being recognized as a dimension. If that's the case, the only alternative is to re-dimension the drawing. Tim Flater Senior Designer Enkei America, Inc. http://www.enkei.com Upvote 0 Downvote
It's possible that the translation caused the dimension to become a non-living dimension. Do an Information -> Object to find out if it's still being recognized as a dimension. If that's the case, the only alternative is to re-dimension the drawing. Tim Flater Senior Designer Enkei America, Inc. http://www.enkei.com