WE HAVE AN REQUIREMENT FOR CARBON MOLYBDENUM STEEL, AS PER ASTM A352 CARBON MOLYBDENUM STEEL IS LC1 MATERIAL(CAST GRADE), IF WE USE FORGED FORM OF CARBON MOLYBDENUM STEEL THEN WHICH WILL BE THE CORRECT MATERIAL, AS I CHECKED THERE IS NO EQUIVALENT FORGED GRADE FOR CARBON MOLYBDENUM STEEL.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CARBON MOLYBDENUM STEEL EQUIVALENT FORGED FORM
- Thread starter N AHMAD
- Start date
Dhurjati Sen
Materials
Dear N AHMAD,
Don't go by the composition alone. Compare the tensile and impact properties too. You should find a near match in ASTM A 350.
Regards.
DHURJATI SEN
Kolkata, India
Don't go by the composition alone. Compare the tensile and impact properties too. You should find a near match in ASTM A 350.
Regards.
DHURJATI SEN
Kolkata, India
- Status
Similar threads
- Locked
- Question
- Locked
- Question