capturing pictures problem 1

[skjoex]

Hi,

to capture images I use these commands:

/UI,COPY,SAVE,PNG,GRAPH,COLOR,REVERSE,PORTRAIT,YES
/RENAME,MSU000,PNG,,'%U3%_UZ_0_%T0%_%T1%...

image itself looks good, but the text is unreadable. Problem is with this PNG format. In ansys manual is not documented for use - I only try and it worked. The same problem is with BMP format. No problem is with EMF file - it is very good quality, but I would like to use PNG because its the smalest size (PNG - 60kB, EMF - 300kB, BMP - 1.2MB).
I want perform a nonlinear parametric study with many variables and capture images in each increment of load - I expect up to 50.000 figures so its size is important to me.

I use Ansys 11.0 64-bit.

Any help is appreciated, Thank you.

Lubo

 

[balu25]

hello Lubo,
try this


/GFILE, 800
/SHOW, PNG, PNG, 0, 8
/REPLOT
/SHOW, close

Regards

Plamen

 

[skjoex]

hello Plamen !

You smiled when you wrote this. You knew that it will work. Yes it works, thank you a lot !

Lubo

interesting thing is that if I change value from 800 to 600 the text is sharper...

 

[balu25]

Hello Lubo,

you are welcome, I am glad I could help

For this change you are right it is interesting, I will check it!

Regards

Plamen