Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can't see view in drafting
- Thread starter LevyMI
- Start date
What version of NX?
Are you using the master model method (model is component in drawing)? If so, have you added drafting views from the drawing part or from the model part?
www.nxjournaling.com
Are you using the master model method (model is component in drawing)? If so, have you added drafting views from the drawing part or from the model part?
www.nxjournaling.com
- Thread starter
- #3
I am using NX 9. I have a FCA (Chrysler Drawing) sent to me by FCA. It seems with there drawings when I am in the modeling side of the drawing and want to creat a custom view I can only see it on the modeling side, when I go to drafting and try to import using the base view button I only see the standard views.
When adding a base view, make sure the "selected part" is the drawing file and not the model file (or vice-versa if that is your workflow).
www.nxjournaling.com
www.nxjournaling.com
- Thread starter
- #5
- Status
