Can we import a stl file and model it in Pro/e.

[wwwvenky]

Can we import a stl file and model it in Pro/e.

i was not able to select anything in that model.

Even i cant copy the surface itself. I cant select the edge of the model also to extract datum curves.

I tried with simple cylinder.

I got the file imported in Pro/e but

The curved surfaces of cylinder are not smooth they are formed of triangles and i cant select any thing.

How to model that file.

Thanks

Venkat

 

[tham]

You might try this:

http://www.ptc.com/cs/tpi/102051.htm