david97
Mechanical
- Nov 4, 2007
- 8
I mean if the maximum hydrostatic pressure out of PED and ASME is used to design pressure vessel having:
Material - 316L ST. STL and working condition
MAWP = 10 Bar at 120 degree celcius
Materials used are ASME material.
2)Do I need to carry out marking and testing as per PED as it is to be used in European Market.
Any views greatly appreciated.
Many thanks
Material - 316L ST. STL and working condition
MAWP = 10 Bar at 120 degree celcius
Materials used are ASME material.
2)Do I need to carry out marking and testing as per PED as it is to be used in European Market.
Any views greatly appreciated.
Many thanks