Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cam profiling engine
- Thread starter hazzi
- Start date
patprimmer
New member
hazzi
I guess that english is not your prefered language, as you question makes no sense at all in english.
Can you try to get a good technical translation into english so we can understand your question.
Maybe you mean degreeing the cam, which is a process of adjusting the cam timeing relative to crank position. If used to advantage, adjustments to cam timeing can move the power curve around. This works well with single cam engines, and even better on twin cams, and better still if it happens automatically as the engine rpm and load changes..
Regards
pat
eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
I guess that english is not your prefered language, as you question makes no sense at all in english.
Can you try to get a good technical translation into english so we can understand your question.
Maybe you mean degreeing the cam, which is a process of adjusting the cam timeing relative to crank position. If used to advantage, adjustments to cam timeing can move the power curve around. This works well with single cam engines, and even better on twin cams, and better still if it happens automatically as the engine rpm and load changes..
Regards
pat
eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
- Status
Similar threads
