Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cam and Follower in ansys

Status
Not open for further replies.
Ignicolist

Ignicolist

Mechanical
Joined
Oct 18, 2013
Messages
27
Location
DE
Hello to all,

At this moment, I would like to simulate the contact of a cam with the follower in ansys transient structural. I´m not able to find any option for this contact.
In this video it is possible to see clearly what I mean.


Thanks in advance.
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
raslraslov
  • Locked
  • Question Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
591
raslraslov
raslraslov
raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
566
raslraslov
raslraslov
Sparky4598
  • Locked
  • Question Question
Materials database for Ansys mechanical
Replies
2
Views
506
Sparky4598
Sparky4598

Part and Inventory Search

Sponsor

Back
Top