Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculix and foundation design

Status
Not open for further replies.
sandborot

sandborot

Geotechnical
Joined
Nov 11, 2008
Messages
2
Location
ES
Hello everybody,

I would like to know if it is worth to use Calculix instead of a commercial geotechnical software (i.e. Plaxis 3D) for 3D foundation design.

If so, I would like to know also if Calculix can perform consolidation analysis or if it capable to deal with interface elements.

Thank you in advance

Toni
 
Status
Not open for further replies.

Similar threads

Mohamed Mowafy
  • Question Question
Design tools
Replies
5
Views
825
Mohamed Mowafy
Mohamed Mowafy
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
1
Views
8K
rb1957
rb1957
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
4
Views
7K
rb1957
rb1957
raslraslov
  • Locked
  • Question Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
617
raslraslov
raslraslov
jmex
  • Locked
  • Question Question
Reaction force to a flat and curved surface study
Replies
9
Views
1K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top