Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculating Minimum Pressurizing Temperature

Status
Not open for further replies.
WeldUK

WeldUK

Materials
Joined
Jan 20, 2012
Messages
21
Location
GB
I have been asked for information on how to calculate the MPT (Minimum Pressurizing Temperature) for a hydrocracker heat exchanger.

Can anyone suggest provide an ASME B&PV reference or any other relevant standards or publications?

A design report I got hold of references a conference paper from ASME PVP-1997 (vol.344), but I cannot find the proceedings for that specific conference in my database.
 
Status
Not open for further replies.

Similar threads

jayinwww
  • Question Question
Calculating Stress Ratio ASME B31.3 Figure 323.2.2A Note 6
Replies
0
Views
481
jayinwww
jayinwww
Drilling Integrity Super.
  • Locked
Formula for Calculating Basic Allowable Stresses in ASME B31.3
Replies
2
Views
5K
Geoff13
Geoff13
T
  • Question Question
Figure 323.2.2-2 (Reduction in Lowest Exemption Temperature for Steels Without Impact Testing) of ASME B31.3
Replies
0
Views
7K
Tommy2025
T
wdavidchris
  • Locked
  • Question Question
ASME IX - Minimum Groove Weld Thickness for Fillet Weld Qualification
Replies
8
Views
1K
wdavidchris
wdavidchris
Jeffrey W
  • Locked
  • Question Question
Ring/Spacer minimum thickness
Replies
3
Views
1K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top