Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculating length of wire in existing electromagnet

Status
Not open for further replies.

hubihubi2

Bioengineer
Joined
May 18, 2011
Messages
26
Location
IE
Hello,

I would like to ask for little help in calculating the length of wire in the existing electromagnet (bought from the shop).
I know that bought electromagnet is for DC, 24[V], 1.3[A], 33[W]. Diameter of the wire is 0.52mm. I kindly ask for help.


Thank you.

Regards
 
If you know the bare wire diameter and the total resistance then assuming the resistivity is close to the standard 100% copper 5.4E-08 ohm-meter you can easily calculate the length of the wire.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top