Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CAD Design for Aircraft Project 1

Status
Not open for further replies.

marianmadalin32

Aerospace
Aug 7, 2022
1
Already started to build a Jurca Mustang Replica. Looking for a volunteer who can draw for free for me parts from PDF files in DWG/DXF in order to continue to cut them on the CNC and assemble them. Many thanks. I had many sponsors who helped for free during this project. If you wish to join, let me know.
294513658_2273211892828345_6572867806222024801_n_afaoxd.jpg
IMG_20220523_144059_bfriln.jpg
IMG-20220714-WA0003_bmkihu.jpg
 
Replies continue below

Recommended for you

This is a repost... from Homebuiltairplane.com forum...
AND Len Anderson... I am making it my duty to rid our website of Your unproductive, self-absorbed, self-promotion... a direct and clear violation of our website's policies for good order and discipline.

Regards, Wil Taylor
o Trust - But Verify!
o We believe to be true what we prefer to be true. [Unknown]
o For those who believe, no proof is required; for those who cannot believe, no proof is possible. [variation,Stuart Chase]
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion", Homebuiltairplanes.com forum]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor