Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

C. Mfg. E testing

Status
Not open for further replies.
dblcrona

dblcrona

Mechanical
Joined
May 29, 2002
Messages
64
Location
US
I am planning on taking my test this year to become a Certified Manufacturing Engineer. Can anyone recommend any good study guides?

Thanks,
Dblcrona

 
Sort by date Sort by votes
On a slight tangent, does anyone had an experience where this certification has helped? i.e. getting a job, higher pay, etc, etc......
 
Upvote 0 Downvote
I've been certified since 1988 and it has not helped getting me a job. Its a nice addon. I ended up going back to school and getting my degree in Mfg. Engineering Technology.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Locked
  • Question Question
Super duplex weld coupon cleaning -G48 Testing
Replies
2
Views
3K
GSB89
G
K
  • Locked
  • Question Question
Punch/Laser Machine, Parts to close to the edge?
Replies
1
Views
1K
mfgenggear
mfgenggear
O
  • Question Question
SAW vs EFW Process
Replies
3
Views
5K
Amp Dylan
A
CarlosGarza10
  • Locked
  • Question Question
Is it possible to calculate punts using RPMs in an extruder
Replies
0
Views
547
CarlosGarza10
CarlosGarza10
tlwhite0311
  • Question Question
Drawings for Every Machining Operation?
Replies
12
Views
7K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top