Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BTU Value in Crude Oil Vapors

Status
Not open for further replies.

sid9999

Civil/Environmental
Joined
Oct 1, 2003
Messages
4
I was looking for BTU value conversioin per cubic foot of crude oil vapors extracted in storage tanks.

Thanks
 
The question is rather simple but the answer is not.

Lower thermal (heating) value of that mixture of gaseous hydrocarbons and air depends on amount and nature of hydrocarbons. In other words depending on temperature and pressure in a tank and certainly type of the oil plays a role in it (content of readily volatile light end hydrocarbons in the oil).

Therefore, the proper answer may vary but I believe that it can’t be higher than half the natural gas thermal value. My wild assumption is that vapour can’t occupy more than half the volume (even that looks too much) and its composition is close to the natural gas composition.
 
A number of modern tankers use the VOCs as fuel. I would expect that there is practical data available from those sources. Try the major web sites such as Wartsila, Man B&W, Caterpillar.
Otherwise you may be faced with measuring this.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top