Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
BS308 equavilent in ISO 1
- Thread starter Hayden
- Start date
Sadly, BS308, was superseded by BS 8888, which informs you of the numbers of other ISO standards. Most sections of BS308 have been replaced by separate/individual standards, and that means a lot of documents! If you can borrow a BS 8888 you should find what you want.
-
1
- #3
You may find the following helpful.
Pub Id :
PD 308:1996
Status :
Current
Title :
Guide to the European standards for engineering drawing in the BS EN series
Description :
Compares the new European standards in the BS EN series and BS 308: Parts 1, 2 and 3 by commentary on a subject basis and by cross-referencing indexes.
ICS Classification : 01.100.01
Committee Ref : TDW/4
ISBN : 0 580 25441 0
Form : A4
Pages : 36
Price : £70.00 (sterling) Non Member Price
Pub Id :
PD 308:1996
Status :
Current
Title :
Guide to the European standards for engineering drawing in the BS EN series
Description :
Compares the new European standards in the BS EN series and BS 308: Parts 1, 2 and 3 by commentary on a subject basis and by cross-referencing indexes.
ICS Classification : 01.100.01
Committee Ref : TDW/4
ISBN : 0 580 25441 0
Form : A4
Pages : 36
Price : £70.00 (sterling) Non Member Price
- Status
Similar threads
- Locked
- Question